ECG Measurement Pulse Heart Electrode Wires

Model: Trangjan-011
Cable specification
①φ3.5mm electrode buckle*3
②85A plug material, TPE grey/white, 85A plug material, TPE red/black green, PE 7144
③φ2.0 30/0.08TC pure copper CABLE+500D nylon wire
④sticker Can paste the description information
⑤ ROHS RACEH California 65 environmental protection standard
⑥ mini DIN plug special equipment use 180° injection molding nickel plating


1. P1 end peeled 15±1mm, P2 peeled 2mm.
2. P1 P2 all need to be dipped in tin before soldering
3.Soldering P1 end to increase the insulation protection of the bushing at a point apart
4. After welding and then test T1. Please refer to the previous description for test parameters.
5. Injection molding P1, test T2 appearance inspection, packaging


1. Connector SR lifting weight (3kg): ≥ 1 minute.
2. Wire and button holding force: ≥5.0kgf.

Testing requirements

1.a.100% conduction, short circuit, open circuit, dislocation, dielectric withstand voltage test;
b. Insulation resistance: ≥20MΩ, DC 300V, 0.01S;
c. On-resistance: ≤2Ω;
d. Withstand voltage: AC 350V I: 1mA T: 0.1S;
2. Instantaneous short circuit test time ≥ 3 seconds;


1. Bundle the single cable by PVC mini tie
2. The product is packaged in a PE self-sealing bag with a vent hole, the bag size is 200*300mm, and the thickness is 0.3mm
3. waterproof and dustproof function and packed the products into a large waterproof PE bag of L800MM*W700MM (open end) *T0.04MM transparent color
4. Using medium outer carton K=K
Carton Size: 450MM*320MM*200MM


There are no reviews yet.

Be the first to review “ECG Measurement Pulse Heart Electrode Wires”

Your email address will not be published. Required fields are marked *